Bullet Compression Tweeters with Crossovers (Pair) X589
Bullet Compression Tweeters with Crossovers (Pair) X589
Factory replacement speaker for your Subaru or Toyota vehicle that's easy to install and bolts right on as a factory replacement. These speakers were designed to give you a much better audio experience than your OEM speaker setup and also work great on your vehicle's factory amplifier or headunit.
These are universal dash speakers that fit on most Subaru and Toyota models that take a 3.5 inch speaker in the dashboard speaker location and will be a night and day difference between your factory speakers.
Easy bolt on solution to get great audio in your factory Subaru's or Toyota's front dash speaker location. Direct replacement for genuine factory part H631SFJ101 and H631SFJ100.
Designed to work with your factory amplifier or radio for rich and full sound overwhelmingly better than stock.
Extremely loud DS18 design that never fails to deliver quality, volume, and sound quality for the long haul.
Toyota:
2011 – 2015 Venza (Dashboard)
2004 – 2021 Sienna (Dashboard)
2005 – 2015 Tacoma (Door)
2015 – 2021 Tacoma (Dashboard)
2002 – 2011 Camry (Dashboard)
2008 – 2020 Sequoia (Dashboard)
2007 – 2020 Tundra (Dashboard)
2004 – 2008 Solara (Dashboard)
2010 – 2015 Prius (Dashboard)
2003 – 2009 4runner (Door)
2010 – 2021 4runner (Dashboard)
2008 – 2013 Highlander (Dashboard)
Subaru:
2012 – 2020 Impreza / WRX / STi
2014 – 2020 Forester
2013 – 2020 Crosstrek
Notes:
Scion BRZ or Toyota FRS / 86 can be replacing the 3.5” mid and 1” tweeter for this tweeter instead.
SPECIFICATIONS
Nominal Diameter 1”
Nominal Impedance 4 ohm
AES Power Handling 50 W
Program Power Handling 100 W
Peak Power Handling 200 W
Sensitivity (1w/1m) 98 dB
Frequency Response 1KHz- 20KHz
Recommended Hi Pass Crossover 4 KHz
Pair or Single Pair
MOTOR
Voice Coil Diameter 1” / 25.4 mm
VC Former Material Kapton
Winding Material CCAW
Diaphragm Material PEN
Magnet Material Neodymium
Magnet Weight 0.57 oz
Body Material PC
MEASUREMENTS
Overall Diameter 4.41x2.68” / 112X68 mm
Overall Depth 1.77” / 45 mm
Front Mount Baffle Cutout 2.15” / 54.5 mm
Mounting Depth 1.33” / 34mm
Electronics Car & Vehicle Electronics Car Electronics